Josh-the-Locksmith
25 Years Experience
Austin, TX
Male, 46
I've been a locksmith since 1998. I did automotive residential & commercial work from 1998 to 2008. From 2008 to 2018, I did some residential, but mostly commercial work. I have been project managing & estimating since 2018. I used to locksmith in the Chicago area, now the Austin area.
You didn’t mention the brand, but it sounds like a common Kwikset problem. Usually just replacing the latch will fix it. Kwikset also has a common problem where the screws back out on the inside of the handleset. Take it apart very slowly. Buy a replacement latch, and put it all back together. Should be good to go.
Share Answer: 
I wonder the same thing all the time. I have moved into project management, and our company now covers a lot more than just locks. We do commercial doors & frames, glass, aluminum storefronts now too, so I help manage a lot of those big projects now. It’s almost like a career change.
Share Answer: 
Model-specific automotive questions because I haven’t done automotive work in 12 years. My answer will usually be the same. Call a local locksmith or go to the dealer. There’s not much people can do on their own when it comes to car locks. It’s complicated and requires a lot of specialty tools and information.
Share Answer: 
Yea it’s possible it’s a different lock. Management might know something about it, or it’s always possible you have the wrong key, or someone open & replaced it with another padlock. Lots of possibilities really. Mgmt might have a way to cut the padlocks off, or you can hire a locksmith to pick the lock or cut/drill it off.
Share Answer: 
Farmer
Do friends with office jobs look down on what you do?
Personal Injury Lawyer
How do I get out of jury duty?
Firefighter
How can you tell if a fire was arson?
As a tech, I would have said the easiest thing to do is residential rekey jobs, the hardest and thing I hated the most was automotive work. Having your arm buried in a door panel in 100 degrees sitting in the sun trying to dig a door lock out; or laying on a customers dirty floorboard working on their ignition. It was the worst.
Love the most, probably all the amazing different places I have been and people I’ve had the opportunity to meet.
Share Answer: 
Depending on the cylinder, the pins/wafers should able to be removed from the cylinder and have it used the way you are asking. If it’s a cam lock like what you would see on a cabinet, they sell thumb turn style cam locks.
Share Answer: 
You say it’s too big for the door. How so? Is your door too thin? If so, you need adapter plates. That’s going to be the case for any equivalent. If your door has a different backset, say 2-3/8” instead of 2-3/4”, you either need to adjust the deadbolt latch, or purchase the correct backset. Depends on brand. If the hole in your door is 1-1/2” in cross bore, you need to get it drilled out to a 2-1/8”. Those high security deadbolts have some flexibility, but not a ton. They are pretty particular as to how they fit, and they’re all pretty similar.
Share Answer: 
-OR-
Login with Facebook (max 20 characters - letters, numbers, and underscores only. Note that your username is private, and you have the option to choose an alias when asking questions or hosting a Q&A.)
(A valid e-mail address is required. Your e-mail will not be shared with anyone.)
(min 5 characters)
By checking this box, you acknowledge that you have read and agree to Jobstr.com’s Terms and Privacy Policy.
-OR-
Register with Facebook(Don't worry: you'll be able to choose an alias when asking questions or hosting a Q&A.)
Browse Jobs
Host a Q&A
Search
Submit Your Question
Host a Q&A
Last 7
